minimum length of shoulder recommended by IRC
question of highway engineering
- 14043 Views
- 34 Answers
-
-
Vinay
- 12 Oct
- 0 Comment
-
-
Shoulders are provided along the road edge to serve as an strongemergency lane for vehicle compelled to be taken out of the pavement or roadway./strong Shoulders also act as service lanes for vehicles that have broken down.br /br /Which gives cross section details of roads in embankment and cutting. The width of the shoulder should be adequate to accommodate stationary vehicle fairly away from the edge of the adjacent lane. strongIt is /strongstrongdesirable to/strongstrong have a minimum shoulder width of 4.6/strong strongm/strong so that a truck stationed at the side of the shoulder would have a clearance of strong1.85 m/strong from the pavement edge.br /br /strongThe minimum shoulder width recommended by the IRC is 2.5 m./strong
-
Mayank
- 29 Jun
- 0 Comment
-
- GATE CIVIL ENGINEERING BOOKS - RECOMMEND SOME BOOKS PLEASE?
- soil has a liquid limit of 50% and plastic limit 30% . when the soil at its liquid limit is dried. the percentage decrease in volume was 40% of dry volume. when it was dried from its plastic limit the
- The bearing capacity of a strip footing on a saturated clay is 120 KN/m2. The bearing capacity of a circular footing (diameter=width) will be.
1. more then 120
2. less then 120
3. equal to 120
4.all
- What will be the cutoff of the GATE 2018 (civil branch)?
- question is regarding survey
a survey line was measured to be 60m. it was found that there is misalignment and line was 1m off straight at middle. the correction in length in m is?
- what is the difference between frame and truss
- soil has a L.L. of 50% and P.L. 30% . when the soil at L.L. is dried.% decrease in vol. was 40% of dry volume. when it was dried from its P.L. %Dec. in vol. is 20% of its dry vol.Shrinkage limit is:?
- How fibre reinforced concrete prevents cracking?
- what are the tips and tricks to study for GATE CE?
- How to understand the competition of GATE 2019 ?
2.5