minimum length of shoulder recommended by IRC
question of highway engineering
- 14048 दृश्य
- 34 उत्तर
-
-
Vinay
- 12 अक्तूबर
- 0 टिप्पणी
-
-
Shoulders are provided along the road edge to serve as an strongemergency lane for vehicle compelled to be taken out of the pavement or roadway./strong Shoulders also act as service lanes for vehicles that have broken down.br /br /Which gives cross section details of roads in embankment and cutting. The width of the shoulder should be adequate to accommodate stationary vehicle fairly away from the edge of the adjacent lane. strongIt is /strongstrongdesirable to/strongstrong have a minimum shoulder width of 4.6/strong strongm/strong so that a truck stationed at the side of the shoulder would have a clearance of strong1.85 m/strong from the pavement edge.br /br /strongThe minimum shoulder width recommended by the IRC is 2.5 m./strong
-
Mayank
- 29 जून
- 0 टिप्पणी
-
- what type of test series should I join?
- What are the cutoff marks for the GATE 2015?
- The bearing capacity of a strip footing on a saturated clay is 120 KN/m2. The bearing capacity of a circular footing (diameter=width) will be.
1. more then 120
2. less then 120
3. equal to 120
4.all
- Who conducts the GATE? What is the duration of the exam?
- Please any one send syllabus of gate 2017
- testing
- query related to questions
- explain effect of compaction on dry density ?
- Over taking time required for a vehicle with design speed of 50km/h and overtaking acceleration 1.25m/s2 to overtake a vehicle moving at a speed of 30 km/ h is...
- can anyone suggest me how to start gate(Civil) study and notes????
2.5