Desirable Hardness in a file is generally?

A) 45 HRC B) 60 HRC C)80 HRC D)90 HRC

the material of tap is

hcs hss stenles stel alloy

what is unit of resistivity?

A)ohm B)ohm meter c)ohm/cmcube

Internal grinding requires the grinding wheel to move _________ .

a) Vertically up and down b) Transversely c) Longitudinally d) Transversely and reciprocally

in EFI system the exhaust gas sensor the percentage in exhaust gas for calculating air fuel ratio A) Nox. B) co. C) O2 D hc

kiran

The unit of luminous intensity is.....

1)lumen 2)candela 3) illumination 4)lux

What is the angle of prick punch?

Tell mee

what is the minimum age in order to take admission into iti s?

a) 12years b) 14years c) 18years d) 21years

What is conductor?

Plz

which non metal have a elastic

A.Plastic B.Wood C. Rubber D. Ebonite

megar is unit of =?

what is megar

what is the least count outside micrometer?

0.001 0.01 0.02 0.002

the fuse wire is

what type of bearing will you recommended for use in conveyor belt rollers

a, ball bearings b,magnetic bearings c, roller bearings d, needle bearings

1Mm is equal?

a 1o micron b 100 micron c 1000 micron d 10000 micron

1 meter =....... Microns

Answer me

A split pin is used for locking with?

(a) Castle nut (b) Square nut (c) Check nut (d) Flanged nut

tap made form........

a) high speed still b) high carbon still c) low carbon still d) alloy still

While grinding one must use

a) Dark glass screen b) Mask c) Safety goggles d) Sun goggles

A split pin is used for locking with?

(a) Castle nut (b) Square nut (c) Check nut (d) Flanged nut