ELECTRONIC DEVICES AND CIRCUITS
4. The VCE(sat) voltage of an npn transistor in saturation continues to decrease slowly as the base current increases. In the Ebers-Moll model, assume αF = 0.99, αR = 0.20, and Ic = 1mA. For T = 300K, determine the base current, IB, necessary to give (a) VCE (sat) = 0.30V, (b) VCE(sat) = 0.20V, and (c) VCE(sat)=0.10V.
- 1964 Views
- 1 Answers
1 Answers
-
-
Shruti
- 11 Mar
- 0 Comment
-
- there is no more numerical question for practice
- I am from Electronic Engineering Rait . If I scored under 100 ranked in gate can I get Mtech in IIT BOMBAY for any subject from CS
- This is the general Q... Four divided by half and add by four.... Whats d ans?
- gate ece preparation tips for undergraduate
- preparation
- hi guys anyone applied to nielit scientist B exam?Is general awareness and general aptitude are the part of the exam?
- gate ece preparation tips for undergraduate
- 3. A germanium pn diode at T = 300K has the following parameters: Na=1018cm-3, Nd = 1016cm-3, Dp = 49cm2/s, Dn = 100cm2/s, τp0 = τn0 = 5µs, and A = 10-4cm2. Determine the diode current for (a) a for
- Which are the other entrance examinations for MTech other than GATE (Electronics and communication)?
- how to find a resistor value?
Practice Mock Test
gate electronics and communication
VCE(sat) = 0.20V is the correct answer.