in an induction motor if air gap is increased.. what will be the power factor..increase or decrease..& why?

..

• Aditya
• 19688 दृश्य
• 10 उत्तर

• If frequency remain same and we increase the size of antenna then what will be the beam width.

  • Bilal
  • 25 अप्रैल
  • 0 टिप्पणी

  0

  ---

• decrease

  • Priyanka
  • 08 फरवरी
  • 0 टिप्पणी

  0

  ---

• in an induction motor if airgap is increases then power factor of the motor gets decreases because the motor draws more magnetizing current which lags the voltage by a more angle. if the angle b/w voltage and current is more then the power factor will be less.

  • Aluru
  • 24 दिसम्बर
  • 0 टिप्पणी

  0

  ---

• Hello

  • Rony
  • 22 दिसम्बर
  • 0 टिप्पणी

  0

  ---

• absolutely it is decrease. As the inductive reactance increases, impedance increases hence powerfactor reduces.

  • Vangala
  • 21 दिसम्बर
  • 0 टिप्पणी

  0

  ---

• IF AIR GAP IS MORE THAN PF WILL REDUCE BECAUSE LEAKAGE FLUX IS MORE FROM STATOR TO ROTOR.

  • Sk
  • 11 दिसम्बर
  • 0 टिप्पणी

  1

  ---

• decrease

  • Gokul
  • 25 सितम्बर
  • 0 टिप्पणी

  0

  ---

• power factor will decrease and will be lagging . because increase in airgap causes stator winding to draw more magnetization current which causes total resultant current to Lagg more behind applied voltage and finally power factor will decreas

  • Anuj
  • 25 सितम्बर
  • 0 टिप्पणी

  5

  ---

• Power factor decrease

  • Vigneshwaran
  • 13 सितम्बर
  • 0 टिप्पणी

  0

  ---

• if air gap increases the magnetising current Im draws from the supply increases .the Im is inversely proportional to the power factor,from this Im increases p.f decreases

  • Molughu
  • 13 सितम्बर
  • 1 टिप्पणी

  12

  ---

• In a constant V/f control of induction motor, the ratio V/f is maintained constant from 0 to base frequency, where V is the voltage applied to the motor at fundamental frequency f.
• 50 rank in GATE2018 achieve .IF I RUN TO STUDY THAT TIME HOW MANY HOURE I STUDY IN 24 HOURE IN
• what is surge impedance ?
• in induction motor the rotor input is 600W and slip is 4% the rotor copper loss is ???
• is Parker Smith problem book enough for GATE(electrical students)..? give me suggestions if any
• can any 1 xplain me about armature reaction in simple manner.what really happens in this concept? ?
• Power semiconductor devices query
• do you know why transmission voltage is in multiples of eleven(11)
• pls tell me which book will be gud for power electronics..
• Reference Books For All Subjects For Gate